Absco Industries
Assembly Instruction Manual
SPACE SAVER SHED
MODEL: 30082SK-PTX
10’ W x 2’7” D x 5’11” H, 6’5” H
Model: 30082SK-PTX
12/7/23
1.1
2
Australian Made
Approx. 4 hours
15 mins
4+
GENERAL INSTRUCTIONS
• Before commencing any assembly, read
through these instructions in detail to gain
a thorough understanding of assembly
methods and associated details.
• Unpack the carton and carefully identify
and check off all the parts against the
parts described and illustrated on
"COMPONENTS PACKING LIST" pages.
SITE PREPARATION
• The site for the shed must be level. An
uneven surface may result in misalignment
of parts.
• The shed shall be erected on top of a
reinforced concrete slab and anchored
down appropriately illustrated on “FINAL
CONSTRUCTION” page.
SAFETY NOTES
• Some parts may have sharp edges. It is
advisable to wear gloves when handling these
items and safety glasses if drilling holes.
Sensible shoes are highly recommended.
• Do not erect your shed in windy conditions.
• Ensure that the shed is securely anchored
to a solid foundation immediately after
construction is completed.
• It is highly recommended to erect the shed
with two or more people.
• Do not sit, stand or walk on the roof of your
shed.
Ladder
Hammer drill
Shifter
metal & masonry drill bits
to suit anchor fasteners
Pop riveter
SUPPLIED
Tinsnips
Cordless drill
NUMBER OF HOURS REQUIRED
ASSEMBLY DIFFICULTY
NUMBER OF PEOPLE REQUIRED
Basic
Complex
TOOLS REQUIRED
RECOMMENDED
Personal protective
equipment for tools
Hand
Protection
Enclosed
Shoes
Raised work surface. EG
Sawhorses and timbers
Heavy and/or bulky. Multi-
person lift or mechanical aid.
2 - 3 people
