Absco Industries
Assembly Instruction Manual
SPACE SAVER SHED
MODEL: 30082SK-PTX
10’ W x 2’7” D x 5’11” H, 6’5” H
Model: 30082SK-PTX
12/7/23
1.1
9
Australian Made
Part numbers are found on
the inside of the sheeting
near the corner.
Shown as grey box on left
1.
Overlap specified sheets as
shown. Make sure ends are flush.
Where possible, have sheets
orientated so printed part
numbers are as shown.
edge holes to outside
edge holes to outside
2.
Fasten with self tapping
screws through prepunched
sheet-to-sheet holes on overlap.
If you can’t see bottom hole twist
the sheet left or right.
Make a new hole with supplied
drill bit if bottom hole is too far
up or down the sheet or not
found.
3.
Attach the top and bottom
channels using the SNAP-TiTE
method.
Make sure you have the short
side of the channel to the
outside of the sheeting
81B
55B
REAR PANEL
ASSEMBLY
ST
AR
T HERE
43B
43C
43C
43B
