ABSCO INDUSTRIES
ASSEMBLY INSTRUCTION - MODEL: J23151GECOK 30/07/14
ECO Garden Shed -
Model: J23151GECOK
INSTRUCTIONS
AND VIDEOS
PAGE 17
6. DOOR PANEL ASSEMBLY
NOTE: Nuts and bolts (supplied) may be used instead of
pop rivets (supplied) by simply enlarging the hinge hole
sets in the jamb using a 4mm drill bit
91A
91A
B
NOTE: The two holes required to connect the padbolt hasp for each door have not been pre-punched, to allow for
proper alignment. position each hasp centrally over the padbolt shaft, and secure with screws. The sheet metal
screws supplied have the ability to self drill through the channel, use a continuous firm pressure and high drill
speed and the screws will penetrate the sheet metal. If necessary a 3mm drill bit can be used.
All manuals and user guides at all-guides.com