GENERAL INSTRUCTIONS
A NOTE ON SAFETY
·
The site for the shed must be level. An uneven surface may result in misalignment of
parts.
·
It is recommended that the shed be set on a 100mm concrete slab and anchored down
appropriately (refer to last page for details).
·
Anchor sets are not supplied as standard items with this product as some customers
wish to use their own anchoring systems.
·
Before commencing any assembly, read through these instructions in
detail to gain a thorough understanding of assembly methods and
associated details.
·
Unpack the carton and carefully identify and check off all the parts
against the parts described and illustrated on pages three and four.
·
Some parts may have sharp edges. It is advisable to wear gloves when
handling these items and safety glasses if drilling holes. Sensible shoes
are highly recommended.
·
Do not erect your shed in windy conditions, ensure that the shed is
securely anchored to a solid foundation immediately after construction is
completed.
·
It is highly recommended to erect the shed with two or more people.
TOOLS REQUIRED
SITE PREPARATION
TOOLS OPTIONAL
10mm
(Steel)
10mm
(Masonary)
ABSCO INDUSTRIES
ASSEMBLY INSTRUCTION MANUAL
SHED MODEL: 45232WK
07-11-2017
Absco Industries
Workshop Shed Model: 45232WK
PAGE 02
