CHECK TRIGGER RESPONSE:
A. Pull the trigger back to accelerate, release it to
decelerate and push it to brake.
B. To stop running your car, release the trigger to
neutral position.
C. Pushing the trigger a second time activates the
reverse function.
MAINTENANCE:
After running your car, the following procedures should be performed regularly and
will help to maintain your car´s performance.
•
Inspect your car for any obvious damage.
•
Check the gears for wear, debris or broken/slipping teeth.
•
Check the wheels and tighten the wheel screws properly.
•
Check loose screws on the chassis
•
Check the wiring for frayed or damaged wires or connectors.
•
Check the steering servo which will wear out over timeand require
replacement.
•
Check the batteries
•
Keep the chassis clean and free of sand, dust and moisture.
•
Remove and clean the motor if necessary (Never attempt to disassemble the
motor, you will damage it).
•
Clean the car body with a soft lint-free cloth
•
Remove all batteries when not in use.
