22
Digital proportional radio control system
6.11 Throttle Speed
This function changes how quickly the throttle will react, both when pressed and released. This is useful
to emulate different models such as big trucks, which in real life take longer to get up to speed and slow
down.
There are 2 main settings in this function:
•
Go: Sets how quickly the throttle applies acceleration.
•
Return: Sets how quickly the throttle backs off.
To adjust these settings:
1. Select the desired setting, [
Go
] or [
Return
].
2. Move the wheel at the bottom of the screen left to reduce the value or
right to increase the value.
The lower the percentage the longer it will take for the throttle to catch up
with the trigger movement.
The bar in the middle of the screen will show the throttle's current position
in real time. When the bar is red, it is showing the triggers' position on the
throttle position. When the function is active, the red line will move first,
followed by the green line as it catches up with the trigger position.
Select the
icon to reset the function.
Select the
icon to return to the previous menu.
6.12 Throttle Middle
This function changes the midpoint of the throttle, and could be used to
correct the servo position. If the servo position is wrong, the model may
move as soon as it's turned on.
To change the midpoint, move the wheel at the bottom of the screen, and
the current position will change in real time on the screen.
Select the
icon to reset the function.
Select the
icon to return to the previous menu.
