background image

16 

                                                                                                                                         

AVALON - Quick Start Manual

 

 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation. This 
equipment generates, uses and can radiate radio frequency energy and, if not installed 
and used in accordance with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and on, the 
user is encouraged to try to correct the interference by one or more of the following 
measures: 
 

 

Reorient or relocate the receiving antenna. 

 

Increase the separation between the equipment and receiver. 

 

Connect the equipment into an outlet on a circuit different from that to which 
the receiver is connected. 

 

Consult the dealer or an experienced radio/TV technician for help. 

This Class B digital apparatus meets all requirements of the Canadian Interference-
Causing  
Equipment Regulation. 

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur 
le matériel brouilleur du Canada. 

European Union regulation compliance statement 

 

This product has been tested to comply with the Low Voltage Directive 2006/95/EC and 
the Electromagnetic Compatibility Directive 2004/108/EC. The product meets the 
requirements of RoHS 2 Directive 2011/65/EU. 

 

This symbol indicates that your product must be disposed of properly according to local 
laws and regulations. 

                                              

 

Summary of Contents for AVALON



















Reviews: