background image

User Operation Guide

This symbol indicates the incorrect handling. Ignoring this symbol can result in the possibility of personal 
injury and physical damage.

This symbol indicates the incorrect handling. Ignoring this symbol can result in the possibility of personal 
injury or even death.

IMPORTANT NOTES

  Thank you for purchasing the Universal Projector Ceiling Mount. This bracket is suitable for about   

 

80% to 90% of projectors up to load of 20kg (44 lbs)

  To ensure correct usage, please read this instruction manual thoroughly. Keep this manual for future

 reference.

  BRACKETS SHOULD BE MOUNTED ONLY BY A QUALIFIED INSTALLER.

  User will be responsible for any injuries and damages tat may arise from improper installation and  

 

handing of Universal Ceiling Mounting Kit.

  Ensure all mounting screws are appropriately positioned and properly tightedned/ fastened.

  Installers are to ensure customer’s safety during installtion.

  We reserve the right to amend or undertake any necessary changes without prior notice. 

CAUTION

WARNING

This symbol indicates additional cautions (including warnings).

This symbol indicates forbidden actions.

This symbol indicates required actions.

Causion

(general)

Forbidden

(general)

Required
(general)

Summary of Contents for AV813













Reviews: