*Specifi cations are subject to changes without notice.
INSTALLATION GUIDE
2. Parts Assembly - Installation of Universal Base
2.2
Lift the Projector with both middle
fi
nger
along the depth of the Projector to
search for the Cental of gravity (CG).
2.4
Locate the Projector CG position and
determine screw size for mounting the
Projector by placing the Universal head
Assembly near to the Projector CG
found in step-2.3.
2.6
Change to a shorter or longer
Extension Brackets provided in the
package if needed. There are 2 sizes
availalble as shown.
2.1
Lift the Projector with both middle
fi
nger
along the depth od the Projector to
search for the Central of Gravity (CG).
2.3
When the CG Point (Depth of Projector)
and (Width of Projector) intersection
meet, that will be the assume CG of
Projector
2.5
Loosen and slide the Extension
Brackets on the Universal Head
Assembly and align them to the
Projector mounting holes.
CG of Projector
CG Point
(Width of Projector)
Extension Bracket - 75 mm
Extension Bracket -150 mm
CG Point
(Depth of Projector)
