*Specifi cations are subject to changes without notice.
1.8
Assemble the selected Extension Bracket
with the following items: Bottom Spacer,
Spacer (if needed) & Square Nut.
* For Extension Bracket more than 50mm
(1.97”) (Square Nut x 2)
2.0
Lift up the Projector to check the CG of the
assembled Projector and tighten all the
screws once con
fi
rmed.
The assembly is then completed.
1.7
Change to a shorter or longer Extension
Brackets provided in the package if
needed. There are 2 sizes available as
shown.
1.9
Use the Tress head screws provided in the
package to tighten the Extension Brackets
to the Projector.
INSTALLATION GUIDE
