User Operation Guide
*Specifications are subject to changes without notice.
4
PANEL DESCRIPTIONS
No. Name
Description
1
INPUTS
A total of six video inputs and three audio inputs.
●
HDMI 1~4:
Connects to HDMI source devices.
●
USB-C
Connects to USB-C source devices.
●
HDBT:
Connects to the HDBT output of a compatible transmitter to receive AV signal.
●
LINE 1:
Connects to audio source device for audio embedding.
●
LINE 2:
Connects to audio source device for audio embedding.
2
OUTPUT
●
HDBT:
Connects to the HDBT input of a compatible receiver to extend AV signal, IR
and RS232 control signal.
●
HDMI:
Connects to the video display device.
●
AUDIO 1:
Connects to audio playback device for audio de-embedding. The audio
output can be de-embedded from the HDBT or HDMI output selected via RS232
command. It’s de-embedded from HDBT output by default.
●
AUDIO 2:
Connects to audio playback device for audio de-embedding. The audio
output can be de-embedded from the HDBT or HDMI output selected via RS232
command. It’s de-embedded from HDMI output by default.
3
CONTROL ●
TCP/IP:
Connects to a control device (e.g. PC) to control the switcher by GUI.
●
RS232 (Control):
Connects to the control device (e.g. PC) to control the switcher by
sending RS232 commands.
●
RS232 (Passthrough):
Connects to the control device (e.g. PC) or a third-party
device for RS232 pass-through control.
●
FIRMWARE:
Type-A USB port for firmware upgrade. Also supplies DC 5V 1A
●
SYSTEM IR:
Connects to IR receiver to control the switcher by the IR remote.
●
IR IN:
Connects to IR receiver for IR pass-through control.
●
IR OUT:
Connects to IR emitter for IR pass-through control.
4
DV 24V
DC connector for the power adapter connection.
Rear Panel
1
2
4
3
