10 Revised
10/2014
will save time since the system will not have to be unhooked.
We have included the pictures and descriptions along with color
coded tubing to make connecting the system simple. If unsure,
feel free to contact us for assistance. Refer to Pre-installation
section for help with quick connect fittings.
Please Note:
Pictures
are for reference only, system variations may occur.
Feed Water Line – RED
Connects from the inlet side of the first housing to the
angle valve adapter.
Tank Line – CLEAR
Connects from the Tee-fitting (connected to membrane
or UV filter depending on system configuration) to the
ball valve on the tank. The tank valve is in the open
position when the handle is in line with the tubing.
Faucet (Good Water) Line – BLUE
Connects from the outlet side of the post filter to the
faucet shank. If using the compression fitting that
comes with the faucet, slide the nut over the tube,
followed by the ferrule, placing the insert into the end
of the tube. Push the tube into the faucet shank and
secure by tightening the line nut. (Refer to Figure 1)
Drain (Waste Water) Line – YELLOW
PRE-CONNECTED - Connects from the membrane to the drain
saddle valve.
©2014 Abundant Flow Water Systems, Inc.
11
Example of Connected System
(System may differ from the one shown)
Optional Ice Maker Kit Installation
You can use your Reverse Osmosis system to provide filtered
water for your refrigerator ice or water machine using kits
available on our website or by calling us at 785-735-9769.
Find the line that leads to the faucet on the RO system. Cut line
with sharp knife or scissors. Connect the T-connector to both
ends of the line by pushing tubing into slip connectors firmly.
Cut a short length of tubing to insert into T-connector T-off. Insert
other end of this tubing into shut off valve fitting. Connect tubing
to other end of shut off valve and into ice machine or water
machine. Lengths over 15’-20’ will lose pressure so use shortest
route possible.
System Start Up:
After all the connections have been made it is time to prepare the
system for use. If the system has a UV filter, plug the wire coming
