32
33
Smartphone with functioning
cMAP App and activated
Bluetooth
®
function in range
(approx. 2-5 m).
Press button on the lock.
With the “Keyless Go”
function in the
app enabled, the lock will open as
soon as the smartphone is within the
immediate vicinity of the lock
.
With the “Keyless Go”
function
disarmed, the lock is unlocked by
pressing the corresponding button in
the app.
Attention: For security reasons, it will
be partially unlocked at first. The
respective form factor will only be
unlocked on one side. This provides
convenient property protection and
prevents the lock from accidentally
falling down.
If you would prefer it to fully unlock -
such as to change a form factor - this
4.1
from transport mode
must be set up in the app.
In monitoring mode
(Alarm, Tracking, Geofence)
Alarm triggering
1. Pre-alarm for slight movement
(5 Sec. duration), that sounds 4
seconds after motion to give the
authorised user the change to
connect to the lock.
2. Main alarm if stronger movement is
detected or if it leaves a defined geo
-
fence. If someone attempts to press
the button, the pre-alarm will sound
first, followed by the main alarm (15
sec duration).
3. The alarm can be interrupted by
an authorised smartphone and by
pressing the button again.
4.2
Summary of Contents for 9001 IoTect
Page 1: ...1 9001 IoTect ...
