25
7. Installation
Proceed as follows when installing the camera.
1. Select a suitable place to mount the camera.
2. Connect the video cable (recommended cable type: RG59) with the BNC video
output (F) of the camera and the device directly connected to the camera. The
maximum cable length should not exceed 150 m.
3. Connect a 12V DC power supply to the screw terminal of the camera (A).
4. Hold the camera at the location where you want to mount it. Check the
orientation and angle of the camera.
5. Make the necessary settings with the function key (C).
6.
Set the required zoom range.
7.
Fasten the camera. Make sure that the camera when outdoors has sufficient
protection (e.g., heated, weatherproof housing).
Summary of Contents for eyseo TV7056
Page 7: ...7 6 Beschreibung der Kamera...
Page 20: ...20 6 Description of the camera...
Page 33: ...33 6 Description de la cam ra...
