Settings
27
Settings
General settings
The recorder system is configured in the "Settings" menu.
The settings dialogues are divided into the following areas:
Menu
Description
Configuration
Used to manage all device settings
(General, Network, Live View,
Warning and User).
Camera
Menu for setting camera parameters
(OSD configuration, image mode,
motion detection, private zone,
tamper monitoring and video loss).
Recording
Menu for setting recording
parameters (schedule, camera
resolution, holiday etc.)
HDD
Used to initialise and manage a built-
in hard disk drive (assign read/write
functionality, cameras, manage
network drive etc.)
Panic
Recording
Menu for setting manual recordings.
Note
Depending on your recorder model and firmware
version number, all of the functions described in
the guide may not be available for your model.
Later firmware updates may add new functions or
expand settings to include further parameters.
You can find the valid firmware version number to
which these instructions refer on the cover sheet
of the manual.
Note
The system configuration can also be performed
via remote applications (e.g.: web interface or
CMS software). Normally, the same functions are
available there. If not described further, then this
guide may be used as a reference.
Note
Camera-specific functions are only explained as
examples within the scope of recorder-relevant
setting options. Further details on these functions
can be found in the camera user guide.
Logout/switch off
Info menu
System configuration
Summary of Contents for HDCC90001
Page 54: ...Setting HDD 54...
Page 64: ...Maintenance 64...
