Setting: Configuration
31
DDNS tab
The DDNS function is used to update host names and
DNS entries.
DDNS
Setting
Enable
DDNS
Activates the DDNS synchronisation.
DDNS type
Select the DDNS service provider.
Region/
country
If necessary, select a region/country.
Server
address
Enter the IP address or host name of
the DDNS provider.
Device
domain
name
If necessary, enter the sub domain of
the device.
Status
Display of the DDNS status
User name
Enter the user name of your DDNS
account.
Password
Enter the password for your DDNS
account.
If you want to use the ABUS server for remote access,
proceed as follows:
1. To be able to use the ABUS DDNS function, you first
need to set up an account at www.abus-server.com.
Please read the FAQs on this topic on the website.
2.
Tick the “Enable DDNS” box. Then select “ABUS
DDNS” as the DDNS type and enter the
www.abus-
server.com
host name in the “Server Address” field.
3. Apply the data by clicking on
Apply
. The IP address
of your internet connection is now updated with the
server.
NTP tab
The Network Time Protocol automatically synchronises
the time via the network.
Note
The recorder can synchronise the time with an
external server. Several server addresses are
available on the internet for this purpose.
1.
Tick the “Enable NTP” box and enter the interval
after which synchronisation should be repeated.
Enter the IP address of the NTP server and the
NTP port.
2. Apply the data by clicking on
Apply
.
NTP
Setting
Enable NTP
Activates the NTP function on the
recorder
Interval (min.) Determines the interval for
synchronisation.
NTP server
NTP server address
NPT port
NPT port
Summary of Contents for HDCC90001
Page 54: ...Setting HDD 54...
Page 64: ...Maintenance 64...
