Setting: Configuration
33
Mapping Type
For “manual” settings, the network
ports can be manually defined using
the “Edit” button.
For “auto” settings, the recorder
checks for free network ports on the
router and defines the port numbers
in a random pattern.
More Settings tab
Used to configure the IP address of the PC where a
notification should be displayed in the event of an alarm.
More settings
Setting
Alarm Host IP
Network address of the CMS station
Alarm host port
Port for your CMS station
(default: 7200)
Server port
Port for data communication
(default: 8000)
HTTP port
Port for the web server
(default: 80)
Multicast IP
You can enter the multicast IP here
too in order to minimise traffic.
The IP address must correspond to
the one in the video surveillance
software.
RTSP port
Enter the RTSP port
(default: 554)
Output bandwidth
limit
Enable limitation on the output
bandwidth
Output bandwidth
(MB/s)
Limit output bandwidths in MB/s
Note
Server port 8000 is used for remote
communication via iDVR Plus/iDVR Plus HD and
ABUS CMS.
HTTP port 80 and RTSP port 554 are used for
remote access to the web interface.
Summary of Contents for HDCC90001
Page 54: ...Setting HDD 54...
Page 64: ...Maintenance 64...
