Setting: Camera
43
b.
Arming schedule:
Configure the
schedule as required.
c.
Linkage action:
Link the selected
actions.
3. Click on
Apply
to save the settings.
4. If you wish to record based on motion detection,
switch to the “
Record
” menu item and select the
relevant cameras under “
Schedule
”. Here you
can configure the schedule using the “
Motion
”
event in order to set up motion-detection-based
recording.
5.
Click on
Apply
to save the settings.
Private Zone
Select the camera channel to be processed under
“Camera” and select the checkbox “Enable privacy
mask”.
Use the mouse pointer to drag the desired privacy masks
across the preview.
Note
You can set a maximum of four privacy masks.
To delete them, select either “Clear all” or the
desired mask on the right-hand side next to the
preview.
Tamper monitoring
The tamper surveillance function monitors the brightness
in the selected image area for darkening. If the lens is
covered, the tamper trigger will be set off.
Parameter
Setting
Camera
Select a camera.
Enable tamper
surveillance
Activate/deactivate the function.
Sensitivity
Define the sensitivity level.
The further to the right the slider
is shifted, the more sensitive the
detection is.
Settings
Set a linkage action.
Video Loss
The Video Loss function monitors the selected camera
channel for image loss.
Note
To record with the aid of motion detection, you
must set up the schedule under
Record
.
Note
For help in programming a
Linkage Action
via
the Settings button, see the “
Linkage action
”
section.
Summary of Contents for HDCC90001
Page 54: ...Setting HDD 54...
Page 64: ...Maintenance 64...
