Setting: HDD
51
Type
Local: Hard disk drive
NAS: Network hard disc drive
IP SAN: iSCSI volume
Free Space
Shows the approximate amount of
free memory for recordings
Group
Group ID
Edit
HDD Settings
Delete
Remove the hard disk drive
Initialising the hard disk drive
1. Select the hard disk drive by ticking the box.
2. Click on
Init
to start the process.
3. The status bar will show the progress of the
initialisation.
4. Once the process has finished, the hard disk drive
will appear.
Add NetHDD
Additional data storage devices can be added to enable
storage across the network.
Click on
Add
to add a NetHDD.
Click on
Search
to identify the network storage and then
click on
OK
to add the NetHDD.
The NetHDD must be initialised before use.
Advanced settings
Here you can define the settings for the storage mode of
individual cameras and hard disk drives.
Storage mode tab
Set the
recorder’s storage mode in this menu.
Two
different storage modes are available in order to
either divide video data among all the hard disk drives or
to allow for targeted write operations for individual
storage devices.
Warning
When using NetHDDs, ensure that your network is
of a sufficient size.
Note
The playback of recorded data may be slower
if you use NetHDDs than if you are using the
internal hard disk drives.
Parameter
Description
NetHDD
Choose from eight NetHDDs.
Type
NAS:
For this setting, your
network storage must support
the NFS file system.
IP SAN:
For this setting, your
network storage must support
the iSCSI protocol.
IP address
Enter the network storage
IP address.
NetHDD Directory
Enter the storage path or
iSCSI target.
Note
Generally, a NFS path is indicated as follows:
“/volume1/ABUS-Recorder”.
Generally, an iSCSI path is indicated as follows:
“iqn.2010-10.Synology-iSCSI:VirtualDisk.01”
Always pay attention to upper and lowercase
letters when using a path description for network
storage.
Summary of Contents for HDCC90001
Page 54: ...Setting HDD 54...
Page 64: ...Maintenance 64...
