Setup wizard
20
Hard disk drive management
1. To set up a hard disk drive, enable the 'checkbox'
with a left click and then click on
Init.
Warning
This will delete all data found on the disc.
2. Click on
OK
to acknowledge the security prompt.
The hard disk drive is set up for use. Progress is
shown on the status bar.
3. Finish the setting with
OK
and then click on
Next
Camera recording
1. Select a "camera" from which to record.
2. Enable the check box "Start recording".
3. Select the recording type. It is possible to select
between "Continuous" and "Movement detection".
4. Press
Copy
to apply the setting to other cameras.
Select the cameras that appear in the new screen.
Enable the appropriate checkbox with a mouse click.
5. Complete the setting and the setup wizard with
OK
.
