16
3. Connections and functions
3.1 Connections
ATTENTION!
Before you begin the installation, make sure that the supply voltage and the nominal
voltage of the camera match.
1:
12 VDC, round plug, 5,5 x 2,1 mm
2:
Network connector (RJ45, PoE 802.3at)
3.2 Housing overview
1: Lens
2:
Light sensor for day/night switch
3:
Camera bracket (3-asis adjustable)
4: Sunshield
(removable,
movable)
3.3 Reset of factory default settings
To operate the reset button please remove the
bottom cover on the downside of the camera.
1. Please disconnect the camera form power
connection.
2. Press the "Reset" button on the camera
and keep it pressed.
3. Now connect the power supply to the
camera (2-pin power supply or Power over
Ethernet), and hold the "Reset" button
pressed for another 30 seconds.
2
1
4
2
1
3
