104
Enter a name here to be displayed as the sender.
Sender's Address
Enter the email address of the sender here.
SMTP server
Enter the IP address or host name of the SMTP server here. (For example: smtp.googlemail.com)
SMTP port
Enter the SMTP port here. This is configured as 25 by default.
Enable SSL
Select the SSL function if the SMTP server requires this.
Interval
Set the interval between sending emails with image attachments here.
Attached Image
Enable this function if images are to be attached to the email in the event of an alarm.
Authentication
If the email server in use requires authentication, enable this function to be able to log onto the server with
authentication.
User names and passwords can only be entered once this function has been enabled.
User name
Enter the user name of the email account here. This is the part before the @ symbol.
Password
Enter the password of the email account here.
Confirm
Confirm the password by entering it again.
Receiver
Receiver1/Receiver2
Enter the name of the receiver here.
Receiver1's Address / Receiver2's Address
Enter the email address of the person to be informed here.
8.3.9 HTTPS
Activate HTTPS:
enables the HTTPS function. This enables a secure connection
with connection certificate. Please note that further steps are
necessary for configuring the HTTPS function.
Create a self-signed certificate:
enter all of the details required for the certificate. When accessing
the camera at a later point, the connection must also be confirmed
in the browser.
Install a signed certificate:
install a HTTPS certificate from an external provider. When
accessing the camera at a later point, the connection is
automatically accepted as secure (address bar shows green).
Apply the settings by clicking “Save”.
