123
Now select a day of the week for the alarm output. To store particular time periods, enter a start and end time.
To activate the alarm input all day, select 00:00 as the start time and 24:00 as the end time.
To apply the settings for all days of the week, click the "Select All" checkbox. To copy the settings to other
days of the week, select the day of the week and click on "Copy".
To apply the changes, click "OK" and to discard them click "Cancel".
8.6.5 Exceptions
Events can trigger the following exceptions:
-
HDD full: If the internal SD card or a linked NAS drive is full
-
HDD error: SD card or NAS drive error
-
Network disconnected: Ethernet cable removed
-
IP address conflict
-
Illegal login: a reaction can be programmed to follow an incorrect login
The following reactions can be programmed:
-
Send email:
-
Notify NVR/CMS:
-
Trigger alarm output
