112
7.11.2 Cover detection
Enable cover detection:
This function monitors the covering of an area in the video
image.
Preview:
Preview and configuration area.
Drawing:
This allows you to draw the area which should be monitored
by cover detection. Operation: Press button -> draw
rectangle in the preview using left mouse button -> press
button again to finish drawing.
Delete:
Deletes the area.
Sensitivity:
Change the sensitivity of the detection here (3 levels).
7.11.3 Alarm input
Alarm input:
Select the alarm input to be configured here (number depending on the
camera model).
Alarm name:
Enter the name here.
Alarm type:
The alarm type specifies the idle and tripping status.
NO: Normally Open
NC: Normally Closed
