82
Type:
Camera item number
Serial No.:
Camera serial number
Firmware version:
Display of the firmware version currently installed
Coding version:
Version number of the video encoder
Web version:
Version number of the website
Plugin version:
Version of the video plugin on the camera
Number of Channels:
Typically, only 1 channel is shown for a camera. A number of
camera channels may be available for IP encoders.
Number of HDDs:
Display of the number of installed storage media (e.g. microSD
card)
Number of Alarm Input: Number of switching inputs on the camera
Number of alarm outputs: Number of switching outputs on the camera
Memory usage:
Internal memory status
Data throughput:
Total video and audio bit rate over the network interface (outgoing)
CPU usage:
Display of the processor usage of the camera.
7.4 System
7.4.1 Date & time
Time zone:
here, select the time zone in which the camera is located.
NTP:
tick the box to synchronise the date and time of the camera
with an NTP time server.
Server address:
enter the server address or the IP address for the NTP server
here. A standard server is already set up and can be adjusted if
required.
NTP port:
enter the NTP port here. The standard port for NTP is 123.
Interval:
select an update interval.
Manual:
manual setting of date and time. Click in the date/time field to
open a configuration menu.
Synchronise with PC time:
use the current PC time currently being used for access (after
saving the settings).
