17
English
1
2
3
4
11. The camera will now restart. If the start-up was successful up to this point, the app displays the
camera's article number in the "Overview" screen. This can take up to 60 seconds.
12. You have successfully completed the startup. All settings and functions can be accessed via the
menu bar at the bottom of the screen.
13. If the Bluetooth setup was not successful, you can alternatively use the installation via WiFi or
network cable. Before using the camera again, reset it to the factory settings, see chapter 3.3.
Note
For the best possible camera experience, we recommend that you always operate the
camera with the latest firmware. The current firmware version and available updates can
be found under "Advanced Options" > "Device Settings".
4.3.2. WiFi setup
1.
Launch the App2Cam Plus and select "Add new device" to start the commissioning process.
2.
Option 1: Scan the QR code on the back of the camera.
3.
Option 2: Select your camera model.
4.
Select "Installation via WiFi".
