3
German
safety instructions
Intended Use
Use the device exclusively for the purpose for
which it was built and designed! Any other use is
considered improper!
Declaration of conformity
ABUS Security-Center hereby declares that the
enclosed product(s) comply with the following
guidelines concerning the product(s):
RED Directive 2014/53/EU, EMC Directive
2014/30/EU, Low Voltage Directive 2014/35/EU,
RoHS Directive 2011/65/EU. The full text of the
EU Declaration of Conformity is available at the
following
Internet address:
www.abus.com/product/Artikelnummer
("
Article number
" in the link is to be replaced by
the article number of the attached product(s)))
It can also be obtained from the following
address: ABUS Security-Center GmbH & Co.
KG, Linker Kreuthweg 5, 86444 Affing,
GERMANY
Important safety instructions
General information
Before using the device for the first time, please
read the following instructions carefully and
observe all warnings even if you are familiar with
electronic devices.
Damage caused by non-compliance with
these safety instructions will void the
warranty. We assume no liability for
consequential damages!
Power supply
Operate this device only with a power source
that supplies the mains voltage specified on the
nameplate. If you are not sure which power
supply you have, contact your power company.
Disconnect the device from the mains power
supply before carrying out any maintenance or
installation work. The device will only be
completely disconnected from the mains if the
power supply unit is removed. In order to avoid
the risk of fire, the mains plug of the device
should always be disconnected from the mains
socket if the device is not to be used for a longer
period of time. Before a storm and / or
thunderstorm with danger of lightning, please
disconnect the device from the power supply or
connect the device to a UPS. Avoid overloading
power sockets, extension cords, and adapters as
this may result in fire or electric shock.
Cord
Always hold all cables by the plug and do not pull
on the cable itself. Never handle the power cord
with wet hands as this may cause a short circuit
or electric shock. Do not place the appliance,
pieces of furniture or other heavy objects on the
cables and ensure that they are not bent,
especially at the plug and at the connection
sockets.
Never tie a knot into a cable or tie it together with
other cables. All cables should be laid in such a
way that nobody steps on them or is obstructed.
A damaged power cord may cause a fire or
electric shock. Check the power cord from time
to time. Do not modify or tamper with the power
cord or plug. Do not use adapter plugs or
extension cords that do not comply with the
applicable safety standards, or tamper with the
power supply or power cords.
Children
Do not allow electrical appliances to fall into the
hands of children! Never allow children to use
electrical equipment unattended. Children are
not always able to recognize possible dangers
correctly. Small parts can be life-threatening if
swallowed. Keep packaging films away from
children. There is a danger of suffocation! This
device should not be handled by children. If used
improperly, springy parts can jump out and
cause injuries (e.g. eyes) to children.
Supervision
The commissioning of monitoring systems may
be prohibited or regulated by law in certain
countries. Before commissioning the plant, the
operator must ensure that the monitoring is
within the legal framework.
Installation location Operating
environment
Do not place heavy objects on the device.
The device is not designed for use in rooms with
appropriate temperature or humidity (e.g.
bathroom) or with excessive dust. For a precise
99specification, check the technical data of the
individual devices. Ensure that there is always
adequate ventilation, no direct heat sources on
the device, no direct sunlight or strong artificial
light hitting indoor devices, the device is not in
the immediate vicinity of magnetic fields (e.g.
loudspeakers), no open fire sources (e.g. (e.g.
burning candles), contact with splash and drip
water on indoor equipment and aggressive
liquids is avoided, the equipment is not operated
in the vicinity of water, in particular the
equipment must never be immersed (do not
place objects filled with liquids, e.g. vases or
beverages, on or next to the equipment), no
foreign objects may penetrate, the equipment is
not exposed to strong temperature fluctuations,
as otherwise humidity may condense and lead to
electrical short circuits, the equipment is not
exposed to excessive shocks and vibrations.
Unpack
While unpacking the device, handle it with the
utmost care.
Packaging and packaging aids are recyclable
and should always be recycled.
If the original packaging is damaged, check
the unit first. If the device is damaged, return
it with packaging and inform the delivery
service.
Commissioning
Before initial operation, observe all safety and
operating instructions!
Improper and unprofessional work on the
electricity grid or on the house installations
poses a danger not only to yourself but also
to other persons.
Maintenance and care
Disconnect the device from the power
supply for maintenance work or cleaning!
Maintenance
Have all maintenance work carried out by
qualified personnel only. Never open the housing
of the device or accessories if this is not
required. The device may only be opened for the
following applications:
Mounting the device, inserting a storage
medium (SD card or hard disk), accessing
essential functions (reset button or WPS
button)
Cleaning
Clean the housing of the device only with a damp
cloth. Do not use solvents, spirit, thinners or
other aggressive substances:
Gently rub the cotton cloth over the surface until
it is completely dry.
Disposal
Attention: The EU Directive 2012/19/EU
regulates the proper take-back,
treatment and recycling of used
electronic equipment. This symbol means that,
in the interests of environmental protection, the
device must be disposed of at the end of its
service life in accordance with the applicable
statutory regulations and separately from
household and commercial waste. The disposal
of the old appliance can be carried out by means
of appropriate official
take-back points in your country. Follow local
regulations when disposing of materials. For
more details about the take-back (also for non-
EU countries), contact your local administration.
Through separate collection and
Recycling conserves natural resources and
ensures that when the product is recycled, all
regulations for the protection of health and the
environment are complied with.
