12
English
C
Press the Network-button 3 times within 1.5
seconds and the Status-LED on the base unit
front will flash 3 times
The App will show if the Add device process
was successful and the Status-LED will turn
off
Repeat the inclusion process from step B if it
was not successful.
5.2.
Mounting & Installation
A
Fasten the mounting plate to the ceiling with
the screws (recommended)
Alternative: Loosen the cover of the double-
sided adhesive and glue the mounting plate
to the ceiling.
Note:
When marking the drill holes, make sure that
there are no electrical lines/cables, pipes or
other important installation components
behind the installation site!
Failure to observe the instructions on site
selection and installation may result in injury,
e.g. due to falling smoke alarm detectors
B
Mount the device on the mounting bracket by
turning it clockwise to lock it into place
