b) Output voltage connection
The output voltage is divided over 4 outputs and delivers together 4 Ampere.
At time of delivery four outputs are secured with a 1A fuse each.
In order to use all four outputs use the included 4 x 1A fuses.
Please take care that the maximum output current does not exceed 4 A.
Possible connections:
1 x 24 Volt / 4A
2 x 24 Volt / 2A
1 x 24 Volt / 2 A und 2 x 24 Volt/ 1 A
4 x 24 Volt / 1A (pre-assembled)
6. Installation pole mount
By using the separate available pole mount TV7610 you can also install the
Outdoor Power Supply at a pole.
Please proceed as following:
-
Remove the screws of the PCB and remove the grommets.
-
Tighten the pole mount with the supplied screws and rubber rings.
-
Install the PCB by tightening the screws.
7. Technical Specs
Mains Voltage
230 VAC / 50 Hz
Mains Fuse
F1A
Output Voltage
24 VAC
Output Current
4A
Output Fuse –
Distribution Board
4 x 1A
Dimensions
18,2 x 18 x 9 cm (L X B X H)
Weight
1,95 kg
Summary of Contents for TV8379
