English
6. Operation and configuration via app
The TVAC19100 Wi-Fi outdoor camera & app gives you the option of switching to live on the
cameras and to configure the recorder. The app for this device can be found in the App Store
under the name of “App2Cam”.
To configure access to the camera, proceed as follows:
①
Set-up – preparation
Download the "App2Cam" app and install it on your
smartphone.
Check that your smartphone or tablet is connected to
the Internet.
There are two ways to connect the camera to the
network:
Option 1:
(Wireless set-up)
Connect the enclosed power supply unit to the camera.
Do not start to set up the camera until both LEDs light
up. This may take around 60 seconds.
Option 2:
(Wired set-up)
Connect the LAN adapter cable provided to the camera.
Connect the cable to your router in the next step.
Then connect the enclosed power supply unit.
Do not start to set up the camera until both LEDs light
up. This may take around 60 seconds.
13
