83
English
Note: Your PC security settings may prevent a video stream. You can change the security
settings to a lower level under “Tools / Internet Options / Security”. Make sure you enable
ActiveX controls and downloads.
4.10 Password
prompt
An administrator password is defined in the network camera as standard. However, the administrator should
define a new password immediately for security reasons. After the new administrator password is stored, the
network camera asks for the user name and password every time it is accessed.
The administrator account is set as follows (factory setting): User name = “admin”; password = “admin”. Each
time the network camera is accessed, the browser displays an authentication window and asks for the user
name and password. If you can no longer access your personal settings in the administrator account, you can
log in again with the “admin” user name / password after resetting the network camera to the factory settings.
To enter a user name and password, proceed as follows:
Open Internet Explorer and enter the IP address of the camera (e.g. “http://192.168.1.14”).
You are then prompted for authentication:
-> You are now connected with the network camera and can see a video stream.
4.11 Accessing the network camera over an RTSP player
You have the possibility of accessing the MPEG-4 / H.264 data streams on the network camera with an
RTSP-compatible media player. The following free media players support RTSP:
VLC Media Player
Real
Player
Quicktime Media Player
The address format for entering the connection data is as follows:
rtsp://<IP address of the network camera>:<RTSP port>/<Type of video data stream>
