110
Motion detection
Time between two event triggers:
Time definition in seconds (up to 999 seconds) before a possible
next event is registered by the camera.
Detection range:
Selection of a previously configured motion range (configuration using the “Motion
detection” item).
Detection type:
Selection of the detection time point
Start: At the beginning of the event
Stop: At the end of the event
Switching input
Time between two event triggers:
Time definition in seconds (up to 999 seconds) before a possible
next event is registered by the camera.
Switching input 1:
Click here to activate the switching input as the trigger. The following switching
thresholds are available:
Active: Upon increasing edge of the switching input
Inactive: Upon declining edge of the switching input
Interval process
Triggering every xx hours xx min.:
The shortest triggering interval is 1 min. The longest triggering
interval is 23 hours and 59 min.
Upon restart
The event is executed upon restart of the camera.
ICR filter
Time between two event triggers:
Time definition in seconds (up to 999 seconds) before a possible
next event is registered by the camera.
ICR filter mode:
The event can be triggered by switching into day or night mode.
Storage space warning
The storage space monitoring of the SD card is used as the trigger.
Network connection inactive
Loss of the network connection is used as the trigger. The action is executed upon reestablishment of the
network connection.
IP notification
Change of the IP address is used to trigger the change. Check the option that is to be monitored (DHCP,
FixedIP, PPPoE)
Summary of Contents for TVIP31001
Page 95: ...95...
