background image

 

English 

Installation location/operating environment 

Operating temperature and operating humidity:  

-20°C to 50°C, maximum 95% relative humidity.  

 

Ensure that: 

 

no direct sources of heat (e.g. radiators) can affect the device  

 

the image sensor is not exposed to direct sunlight or strong artificial light 

 

the device is not in the immediate vicinity of magnetic fields (e.g. loudspeakers) 

 

no naked lights (e.g. lit candles) are on, or next to the device 

 

there is no contact with aggressive liquids 

 

the device is never submerged  

 

no foreign bodies penetrate the device 

 

the device is not exposed to wide temperature variations, as otherwise there may be condensation 
from humidity causing electrical short circuits  

 

the device is not exposed to excessive shock or vibration. 

 

Unpacking the device 

Handle the device with extreme care when unpacking it. 

Packaging and packaging aids can be reused and, as far as possible, should be sent for recycling. 

We recommend the following: 

Paper, cardboard and corrugated cardboard as well as plastic packaging items should be placed in the 
appropriate containers provided. 

If no such facility exists in the area, these materials should be put into the general household waste.  

 

 

Warning 

If the original packaging has been damaged, start by inspecting the device. If the device 
shows signs of damage, return it in the original packaging and inform the delivery 
service. 

 

 

 

75 

Summary of Contents for TVIP41560





































































Reviews: