English
Arming Schedule
To save a schedule for motion-controlled recording, click on "Edit".
A new window appears. Specify here on which days of the week and at which times motion-controlled
recording should take place.
Now select a day of the week for motion-controlled recording. To store particular time periods, enter a
start and end time. To set up all-day motion detection, select 00:00 as the start time and 24:00 as the
end time.
To apply motion detection for all days of the week, click the "Select All" checkbox. To copy motion
detection to other days of the week, select the day of the week and click on "Copy".
To apply the changes, click "OK" and to discard them click "Cancel".
Apply the settings made by clicking "Save".
Linkage method
Notify Surveillance Centre:
Notify Surveillance Center
Send email:
You receive an email as notification; check the checkbox to activate
this.
Upload to FTP:
The event-triggered snapshot is sent if motion is detected.
Trigger Channel:
Enables recording to the internal microSD card.
Other Linkage
There are no alarm inputs/outputs available for this camera.
128
