100
The standard port for SDK transmission is 8000. Communication port for internal data. As an alternative, this
port can be assigned a value in the range 1025 ~ 65535. If several IP cameras are located in the same
subnetwork, each camera should have its own unique server port.
External Port
You can only change ports manually here if the "Port Mapping Mode" was set to manual.
Status
Displays whether the external port entered is valid or not valid.
Not all routers support the UPnP port-mapping function (also know as Auto UPnP).
8.3.5 Multicast
A multicast server is used to duplicate video streams for access by several clients without placing an
additional load on the IP camera.
IP address:
IP address of the multicast server
Stream type:
Selection of the video stream to be made available to the multicast server
Video connection:
Video port
Audio connection:
Audio port
8.3.6 SNMP
SNMP v1/2
Enable SNMPv1:
Enabling of SNMPv1
Activate SNMPv2:
Activation of SNMPv2
Write SNMP Community:
SNMP Community string for writing
Read SNMP Community:
SNMP Community string for reading
Trap Address:
IP address of the TRAP server
Trap Port:
Port of the TRAP server
Trap Community:
TRAP Community string
SNMP v3
Activate SNMPv3:
Activation of SNMPv3
Read user name:
Allocate user name
Security level:
auth, priv: No authentication, no encryption
auth, no priv.: Authentication, no encryption
no auth, no priv.: No authentication, encryption
Authent. algorithm:
Select authentication algorithm: MD5, SDA
Authentication Password:
Password assignment
Private-key Algorithm:
Select encryption algorithm: DES, AES
Private-key password:
Password assignment
Write user name:
Allocate user name
Security level:
auth, priv: No authentication, no encryption
auth, no priv.: Authentication, no encryption
no auth, no priv.: No authentication, encryption
Auth. algorithm:
Select authentication algorithm: MD5, SDA
Authentication Password:
Password assignment
Private-key Algorithm:
Select encryption algorithm: DES, AES
