100
English
Interval:
Update interval with the time server (in hours).
Time zone:
Select the time zone where the camera is located here.
Daylight Saving Time:
Enter the data for the switch from summer time to winter time.
Accept the settings by pressing “OK” or cancel them by pressing “Cancel”.
Initialize
Reboot:
The camera is restarted by pressing this button.
Factory default:
The factory settings of the camera are loaded by pressing this button. The
selection must be confirmed.
Backup setting data:
A back-up copy of all camera settings can be saved here.
Restore setting:
The settings saved in a back-up file can be loaded here.
Firmware upgrade:
A more up-to-date version of the camera firmware can be loaded here.
Information on updated firmware files can be found in the Software section under
http://www.abus-sc.com.
Upload language pack:
A different language can be set here by uploading a language file. German is the
standard language on the camera following delivery.
The language file for the camera can also be uploaded using the supplied IP
Installer. This can be installed in the appropriate language. Language files for
German, English, French, Dutch and Danish can be downloaded from the
Software section under http://www.abus-sc.com.
