124
English
6.8 FTP client
Settings can be made here for the transmission of snapshots or video clips to an FTP server.
General
FTP client:
Activates or deactivates the transmission of image data to an FTP server.
FTP server name:
Enter the IP address or domain name of the FTP server here. If the FTP server where
the data is written is not working through port 21, then the optional port number can be
entered here as <FTP server name:Port>. The maximum length is 64 characters.
User name:
User name of the account configured in the FTP server.
Password:
Password of the account configured in the FTP server.
Passive mode:
Activate this function if the FTP server was configured in passive mode.
Attached file type:
Select here whether snapshots or video clips should be transferred to the FTP server.
The settings can be tested using the “Test” button. Accept the settings by
pressing “OK” or cancel them by pressing “Cancel”.
Alarm sending
Alarm sending:
Activates or deactivates the transmission of image data to an FTP server.
Remote path:
This is the file folder where the images are saved on the FTP server. The
maximum length is 64 characters.
Image file name:
Specify the file name for the image/video file here.
Suffix:
Select the file suffix here. This can be the date and time or a sequence
number.
Delete sequence number:
Resets the sequence number to 1.
Alarm:
In the event of an alarm, certain reactions can be configured for FTP
transmission here. A button for configuring the corresponding alarm detector is
available for each entry (if configuration of the detector or trigger is possible).
Effective Period:
