129
English
Unix network drive (NFS):
Network storage location:
Entry of the IP or drive/folder on the network drive.
For example: my_nas:\folder
The settings can be tested using the “Test” button. Accept the settings by
pressing “OK” or cancel them by pressing “Cancel”.
Alarm sending
Alarm sending:
Activates or deactivates the storage of image data (snapshots) on a network
drive after an event.
Image file name:
Assign a file name for image data storage here. A maximum of 10 letters or
digits are permitted. “_” and “-” can also be used as characters.
Suffix:
The file attachment suffix can be a date and time or a sequence number.
Delete sequence number:
Resets the sequence number to 1.
Alarm:
Select the event which triggers the storage procedure on the network drive.
Motion detection:
All set activity masks.
Audio detection:
The activated audio detector.
Network link down:
Limited network connections. The configured alarm buffer can be used (see the
“Alarm buffer” section).
Alarm input:
The activated digital input can represent the trigger.
Recording time:
Select the recording time on a network drive following an event (5-60 seconds).
