135
English
Alarm sending
Alarm sending:
Activate alarm sending to store video data on SD-Card triggered by alarm events.
Image file name:
Set file name prefix to video file
Suffix:
The file attachment suffix can be a date and time or a sequence number.
Delete sequence number:
Resets the sequence number to 1.
Alarm:
Select the event which triggers the storage procedure on the SD-Card.
Motion detection:
All set activity masks.
Audio detection:
The activated audio detector.
Network link down:
Limited network connections. The configured alarm buffer can be used (see
the “Alarm buffer” section).
Alarm input:
The activated digital input can represent the trigger.
Recording time:
Select the recording time on a network drive following an event (1-60
seconds).
Effective Period:
Always:
The detectors for these alarms are permanently activated.
Schedule:
The detectors for these alarms are activated at defined schedules. Press the
“Schedule” button to configure these settings (see also the “Schedule”
section).
Accept the settings by pressing “OK” or cancel them by pressing “Cancel”.
