137
English
6.12 HTTP
event
Use this function to save image data (snapshots) on a HTTP server. A CGI script on the HTTP server must be
able to receive the data. In the event of questions, please contact your network administrator.
General
HTTP:
Activates or deactivates the HTTP upload function.
URL:
Enter the URL of the HTTP server with the folder parameters here (e.g.
“192.168.0.156/cgi-bin/webcam”).
Port:
Indicates the port where the HTTP server is operated.
User ID:
User ID on the HTTP server.
Password:
Password on the HTTP server.
Proxy server name:
Server name when using a proxy server.
Proxy port number:
Port number of the proxy server.
Proxy user ID:
User ID on the proxy server.
Proxy password:
Password on the proxy server.
The settings can be tested using the “Test” button. Accept the settings by
pressing “OK” or cancel them by pressing “Cancel”.
Alarm sending
Alarm sending:
Activates or deactivates the transmission of image data (snapshots) to a HTTP
server.
Alarm:
In the event of an alarm, certain reactions can be configured for HTTP transmission
here. A button for configuring the corresponding alarm detector is available for each
entry (if configuration of the detector or trigger is possible).
Effective Period:
Always:
The detectors for these alarms are permanently activated.
Schedule:
The detectors for these alarms are activated at defined schedules. Press the
“Schedule” button to configure these settings (see also the “Schedule” section).
