94
English
View size:
Select the window size.
Note: The view size specified here relates to the live image shown in the display mode of the
browser. The resolution set in the camera is always transmitted, even when the view size set
here is smaller.
Protocol:
Allows a connection protocol to be selected between the client and the server. The following
protocol options are available for optimising the application: UDP, TCP, HTTP.
The UDP protocol gives you a larger number of audio and video streams in real time. However, some data
packets can be lost due to the large data volume in the network. Pictures may be unclear in this case. The
UDP protocol is recommended if you have no special requirements.
With the TCP protocol, fewer data packets are lost and the video display is more accurate. However, the
disadvantage of this protocol is that the video stream is transmitted at a lower frame rate than the UDP
protocol.
Use the HTTP protocol if the network is protected by a firewall and only the HTTP port (80) is available.
The selection of the protocol is recommended in the following order: UDP – TCP – HTTP.
This function is only available when using Internet Explorer.
Video buffer:
Activate the video buffer if your connection only has a limited bandwidth. Image data is saved
temporarily in the network camera for clearer transmission, meaning the image delay is increased.
Image setup
Set the brightness, contrast, saturation and sharpness here.
This function is only available when using Internet Explorer.
