85
Initializing
Restart:
If you press the button, the camera is restarted.
Sequencing mode:
Restart every x days at the point in time at which the
function is activated.
Schedule mode:
Restart on the desired weekday at a certain time.
Factory settings:
Pressing this button causes the factory settings of the camera to be loaded. The
selection must be confirmed.
TCP/IP:
Check this box to exclude the network setting values from being reset.
Date/time:
Check this box to exclude the date/time values from being reset.
Save settings:
Here you can save a backup file of all camera settings.
Load settings:
Settings saved to a backup file can be loaded here.
Update firmware:
A more current version of the camera firmware can be loaded here. Information
on updated firmware files can be found in the Software section at
“http://www.abus-sc.com”.
Language
Upload language packet:
You can set a different language here by uploading a language file. German is
the standard language on the camera upon delivery. The language file for the
camera can also be uploaded using the included IP Installer. This can be
installed in the appropriate language. Language files for German, English,
French, Dutch, and Danish can be downloaded from the Software section at
“http://www.abus-sc.com”.
