Menu
18
DISPLAY
OSD
STATUS BAR
TIMEOUT
Time until status bar is hidden in
live view.
CAMERA TITLE
Enables/disables camera title.
RECORDING
MODE ICON
Enables/disables recording icon.
BORDER
Border around each channel in
multi screen display mode.
BORDER COLOR
If the border is ON, the operator
can choose the color.
MOTION SENSOR
DISPLAY
If ON areas where motion is de-
tected are highlighted with colored
blocks.
MOTION COLOR
The color of the blocks displayed
when MOTION SENSOR
DISPLAY is set to ON.
LANGUAGE
OSD language.
MONITOR
SEQUENCE
DWELL
Time how long each channel is
displayed in sequence operation.
SPOT DWELL
Time how long each screen is dis-
played on the spot monitor output.
DE-INTERLACE
MODE
When recording any channels in
D1 resolution (704 x 576), this
should be set to ON to prevent
judder during playback.
ALARM POP-UP
MODE
When set to ON, an alarm input
will cause the associated channel
to display in full screen mode.
ALARM POP-UP
DWELL
Determines how long the full
screen popup is displayed after an
alarm input is triggered. If the
alarm condition continues, the
popup screen is displayed con-
stantly.
MOTION POP-UP
MODE
When set to ON, motion detection
will cause the associated channel
to display in full screen mode.
MOTION POP-UP
DWELL
Determines how long the full
screen popup is displayed after
motion detection. If motion contin-
ues, the popup screen is displayed
constantly.
SEQUENCE
When the SEQ button is pressed, the default sequence
will cycle through all 4/8 channels, one by one.
Sequence setup allows the operator to define a custom
sequence, using mixed multi screen views and any
desired channels.