Device menu
Alarms
Select Alarm In Select the alarm input to be set, from
1 to 4.
Alarm Type
N.O.: Normally open circuit
N.C.: Normally closed circuit
Alarm Handling This defines whether a policy is per-
formed in the event of an alarm.
Policy
This sets the event policy for the
alarm input.
PTZ Linkage
This specifies whether the PTZ cam-
era starts up a preset.
Copy to Alarm In Copy the alarm settings to further
alarm inputs.
Alarm Out
Displays the alarm output
(fixed value).
Time
Enter here how long the alarm output
is switched. If you select “Manual”,
the alarm output is only deactivated
when “Alarm output stop” in the “Utili-
ties” menu is confirmed.
Alarm Out Time This specifies in the schedule when
the alarm output is activated.
Exceptions
You can define policies here for vari-
ous events, e.g. email notification.
Alarm In Handling
In the event that the alarm input is triggered, the following
policies can be started:
Parameter
Setting
Record
Camera
Select a camera for recording.
Schedule
Select the period to which the settings
apply.
On Screen
Warning
Triggering camera is displayed in full-
screen mode.
Upload to
Center
Notifies a PC with the ABUS DVR
client software.
Trigger Alarm
Out
Alarm output is triggered.
Send Email
Email is sent.
PTZ
You can define here whether a PTZ camera carries out a
policy as soon as an alarm input is triggered.
29