ABUS
ABUS
ABUS
ABUS
192.168.0.60
192.168.0.60
192.168.0.60
192.168.0.60
192.168.0.60
Select an IP camera from the list. Click
Refresh
to update the list.
The IP camera has now been added and should show
Connect-
ed
. If
Connected
is not shown, then check the entered connec-
tion data. To do this, select the IP camera from the list and click
“Set”. Click
Exit
.
Click
Done
. The recorder has now been set up and can now be
used for recording. Further information on the recorder can be
found in the manual.
If no devices are displayed, then enter the data manually. When
entering the IP address, ensure that it corresponds to the relevant
IP address positions (see point 31, e.g. 192.168.0.60).
Manage
Port
is set to 80 as standard, but can vary. Click
OK
.
Analogue cameras and digital IP cameras can be added, removed
and managed here. To add an IP camera, click
Add
.
On ABUS hybrid digital recorders, you have the possibility of inte-
grating ABUS IP cameras. Click
Enter
. On all other models, exit
the setup wizard by clicking
Done
.
38
36
39
37
41
40
MA-4101-002-Bedienungsanleitung-TVTVVR60000.indb 28
16.09.2010 11:23:17
