14
3. Adjust the back gate loosen the 4 fl at head screws on the back of the gate. Then slide
the right and left sliders to the desired position. Tighten all 4 of the fl at head screws-
Note: It may be easier to remove these screws with the link locking pins removed.
Right and Left Sliders
Flat Head Screws
4. Use the cradle release lever to un-latch the cradle and position the wheel cradle in
the down position. Adjust the connecting links to the longest length by removing the
link locking pins and extending the links. Then re-insert the link locking pins in the
link holes.
Wheel cradle to be in “down’ position
Connecting Links
Cradle Release Lever