Chair checklist and maintenance schedule
An electric wheelchair needs some basic care and attention to ensure it provides reliable service. We
recommend that you ensure the wheelchair is checked regularly for maintenance requirements and receives a
thorough annual maintenance check.
To help keep your chair operating in a safe manner, please carry out the following checks on your wheelchair
according to the schedule outlined. Check your chair for any obvious problems every time before you use it.
Daily
Weekly
Monthly
Armrests
Ensure that the armrests are secure
Check armrest pads for damage
Backrest angle
adjustment
turnbuckle
Ensure that the backrest adjustment turnbuckle
is in good condition and tightened correctly
Batteries charged
Ensure batteries are fully charged
Casters
Check front and rear casters for damage
Check casters for free rotation
Check that caster forks swivel freely
Controller system
Check for damage to controller cables and
connections
Check for damage to the rubber boot around
the joystick
Drive wheels and
clutch release system
Check that the wheel hub clutch release system
or motor brake release system operates easily
and smoothly
Fasteners
Check for any loose fasteners
Legrests and
footrests
Check that the legrests lock securely
Check that the footrest plates operate correctly
Seat depth
adjustment cam
Check the seat depth adjustment cam is tightly
fastened.
Tyres
Check tyres and casters for any damage or
excessive wear.
Check for correct inflation. The maximum
pressure in the pneumatic drive wheels is 35psi
or 240kPa
Upholstery
Clean and check seat and backrest for damage
to upholstery, such as scuffs or tears.
Cleaning your TRAXX 2 Rear Wheel Drive
It is recommended that you clean your chair regularly to keep it in good condition. This will also give you a
chance to inspect the wheelchair closely, finding any items that may need maintenance or repair.
keep the upholstery and frame clean by wiping with a soft cloth, specially after driving through wet,
sandy or muddy conditions. Do not use harsh abrasive materials when cleaning. Do not apply liquid
cleaners or solvents directly to the controller system, battery charger or any electrical connections.
