5
Basic System Functions
a. Cooling Mode
• Temperature setting range is 60.80F - 86.00F.
• Should the outdoor unit malfunction or should it go into Protection Mode, the indoor unit will maintain operational
status.
b. Drying Mode
• Temperature setting range is 60.80F - 86.00F.
• The fan will operate at low speed and the swing will operate at normal speed.
• Should the outdoor unit malfunction or should it go into Protection Mode, the indoor unit will maintain operational
status.
• Sleep function is not available in Drying Mode.
c. Heating Mode
• Temperature setting range is 60.80F - 86.00F.
• While in Heating Mode, the indoor unit will enter into cold air prevention status. When the unit stops (or is turned off),
the indoor unit enters into residual heat blowing status.
d. Auto Mode
• Heating preset = 680F. Cooling preset = 770F. The unit will switch between cooling and heating automatically.
• Should the outdoor unit malfunction or should it go into Protection Mode, the indoor unit will maintain operational
status.
e. Fan Mode
• Temperature setting range is 60.80F - 86.00F.
• The fan will operate at its user set speed on the indoor unit.
• Indoor fan can operate at HIGH, MEDIUM, LOW, or AUTO fan speed.
Other Controls
a. Buzzer
• During start-up, the indoor unit will beep indicating it has been turned on.
b. Auto Button
• Pressing the AUTO button will put the unit in auto mode.
• The indoor unit fan will operate at auto fan speeds (variable based on ambient temperature) and swing will function
while auto mode is on.
c. Auto Fan
• During auto heating mode, the auto fan speed will adjust the fan speed automatically based on ambient temperature.
d. Sleep
• Once Sleep Mode is engaged, the system will adjust the set temperature automatically based on ambient temperature.
e. Timer Function
• General timer and clock timer can be customized using the remote controller.
f. Memory Function
• This function can memorize temperature settings, modes, swing settings, light, fan speeds, and general timer setting.
• Unit can be turn on based on memory settings.
• Clock timer cannot be memorized.
g. Health Function
• While the indoor fan is engaged, you can set this function by use of the remote controller.
• Turning on the unit using the AUTO Button, will turn the health function on by default.
• Turning off the unit will cancel the Health Function.
1
.2 Brief Description of Modes and Functions
