27
For more cool Wattage products visit our website at http://watt-age.globalhobby.com
❑
Secure the cockpit deck into place using one 3mm x 16mm
flange-head wood screw.
☛
Don't overtighten the screw. You don't want to crush the
wood or tear the covering material.
❑
# 1 Phillips Head Screwdriver
❑
Excel Modeling Knife
❑
Scissors
❑
Electric Drill
YOU'LL NEED THE FOLLOWING PARTS:
❑
{3} Velcro
®
Squares
SECTION 12: FINAL ASSEMBLY
❑
{1} Decal Set
YOU'LL NEED THE FOLLOWING SUPPLIES:
❑
5/64" Drill Bit
❑
Ernst Airplane Stand
❑
Ruler
❑
Scotch
®
Tape
Step 1: Installing the Receiver
❑
Plug the elevator and rudder servo leads into their proper
slots in the receiver.
❑
Mount the receiver to the fuselage floor, in front of the
servo tray, using a piece of double-side tape (not included).
❑
Drill a 5/64" hole through the fuselage floor, next to the receiver, for the antenna to exit.
❑
Uncoil the receiver antenna and feed it out through the hole.
❑
Secure the antenna to the bottom rear of the fuselage using a piece of Scotch
®
Tape.