Weighing Mode
Display
There are two different weighing units in Weighing Mode: grams and ounces. It can be identified if
the upper right LED is light on. If the LED is light on, the weighing unit is ounce.
The readability is 0.1g or 0.002oz base on the weighing unit selected in Setup Mode.
For high resolution mode, the readability is 0.01g or 0.0005oz.
Note: To change default weighing unit, please see
Chapter 4 Default Unit Setting
for more
information.
Operation
1. Press
button for tare (zero) operation.
2. Press and hold
button for 1 second to switch to Dual Display Mode.
Dual Display Mode
Display
The LED display shows [
0
:
00
0
.
0
] with timer on the left and the weight value on the right.
Operation
1. Press
button to start/pause/reset the timer.
2. Press
button to tare the weight.
3. Press and hold
button for 1 second to switch to Auto Start Mode(please insert the Droplet
icon here).
Note
1. The maximum time that can be displayed is 9 minutes and 59 seconds.
2. When the limit is reached, the timer still goes up until 999 minutes and 59 seconds. It can be
observed by iOS/Android App.
Chapter 3: Basics 12
